- Tinted Paints
- Interior Emulsion Paint
- Interior Trim Paint
- Interior Varnishes & Oils
- Interior Furniture Paint
- Anti Mould Paint
- Anti Damp Treatment
- All Surface Primer
- Special Surface Primer
- Floor Paints & Coatings
- Exterior Paint
- Exterior Masonry Paints
- Exterior Trim Paints
- Exterior Paint Undercoat
- Exterior Oils & Varnishes
- Shed & Fence Paints
Leyland Trade Hardwearing Matt Brilliant White
Leyland Hardwearing Matt is a superior quality paint specially formulated to deliver an extremely durable and hardwearing finish. The paint film is washable and scrubbable with both stain and moisture resisting properties making it ideal for areas that are subject to wear and tear or condensation. Suitable for interior walls and woodwork, the non yellowing formula is low odour and fast drying ensuring easy application and minimal downtime
What coverage will I get from Leyland Trade Hardwearing Matt?
1 litre will cover approximately 12 square metres depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats. When using more than one tin of a colour in the same room, intermix before use
How should I prepare my surface(s)?
Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Seal absorbent surfaces with a solution of up to 1 part water to 4 parts Hardwearing Matt. Prime bare timber and metal surfaces with the appropriate Leyland Primer. Rub down sound previously gloss painted surfaces with fine waterproof abrsive paper and rinse thoroughly before applying a pre-coat of Leyland Trade Acrylic Primer Undercoat. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
How do I apply Leyland Trade Hardwearing Matt?
Stir well before use and apply by brush, roller or spray. When using a roller, use a medium pile synthetic type. Do not overfill the tray. Ensure roller is loaded evenly. If using a brush, load generously. Apply liberally and evenly; avoid overspreading. Under normal conditions, allow 4 hours before applying a second coat if required. Do not apply when air or surface temperature is below 10°C
Brands | Leyland Trade |
---|---|
Ready Mixed or Tinted | Ready Mixed |
Finish | Matt |
Composition | Water Based |
Location | Interior |
Suitable For | Concrete, Plaster, Walls, Brickwork, Blockwork, Wallboards |
Coverage | 12m2 per Litre |
Touch Dry | 4 Hours |
Application Method | Brush, Roller, Spray |
VOC Level | Low |
Offshore Delivery | No |
Colour | White |
Colour Name | Brilliant White |