- Tinted Paints
- Interior Emulsion Paint
- Interior Trim Paint
- Interior Varnishes & Oils
- Interior Furniture Paint
- Anti Mould Paint
- Anti Damp Treatment
- All Surface Primer
- Special Surface Primer
- Floor Paints & Coatings
- Exterior Paint
- Exterior Masonry Paints
- Exterior Trim Paints
- Exterior Paint Undercoat
- Exterior Oils & Varnishes
- Shed & Fence Paints
Leyland Trade Undercoat White
A dense covering, alkyd-based undercoat, the ideal foundation for Leyland High Gloss. Suitable for interior and exterior use providing a smooth surface on both wood and metalwork.
What coverage will I get from Leyland Trade Undercoat?
1 litre will cover approximately 17 square metres, depending on the nature and porosity of the surface
How should I prepare my surface(s)?
Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Prime all new and bare surfaces with the appropriate Leyland Primer. Rub down sound previously painted surfaces with fine waterproof abrasive paper to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding
How do I apply Leyland Trade Undercoat?
Stir well before use. Suitable for application by brush or roller. The brush should be fully loaded for best results. Do not thin. Apply one or more coats as required and allow 16-24 hours drying between coats under normal conditions. Do not apply over polystyrene surfaces.
Brands | Leyland Trade |
---|---|
Finish | Matt |
Composition | Solvent Based |
Location | Interior/Exterior |
Suitable For | Metal, Wood |
Coverage | 17m2 per Litre |
Touch Dry | 4-6 Hours |
Application Method | Brush, Roller |
VOC Level | High |
Offshore Delivery | No |
Colour | White |
Colour Name | White |