- Tinted Paints
- Interior Emulsion Paint
- Interior Trim Paint
- Interior Varnishes & Oils
- Interior Furniture Paint
- Anti Mould Paint
- Anti Damp Treatment
- All Surface Primer
- Special Surface Primer
- Floor Paints & Coatings
- Exterior Paint
- Exterior Masonry Paints
- Exterior Trim Paints
- Exterior Paint Undercoat
- Exterior Oils & Varnishes
- Shed & Fence Paints
Leyland Trade Super Leytex Matt Brilliant White
In stock
Only %1 left
%1 available
As low as
£29.16
£34.99
People also bought
A full bodied, quick drying, high opacity, matt finish for interior walls and ceilings. Ideal for work on new plaster, the permeable film has the added benefit of allowing new plaster surfaces to breathe and dry out
What coverage will I get from Leyland Trade Super Leytex Matt?
1 litre will cover approximately 13 square metres, depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats. When using more than one tin of a colour in the same room, intermix before use
How should I prepare my surface(s)?
Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Make good surface imperfections and cracks with Filler. Prime where required with the appropriate Leyland Primer. Rub down glossy surfaces with fine waterproof abrasive paper. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Seal absorbent surfaces with a solution of 1 part water to 9 parts Leyland Super Leytex High Opacity Matt Emulsion.
How do I apply Leyland Trade Super Leytex Matt?
Stir well before use. Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added. Suitable for application by brush, roller or spray. Apply paint evenly by brush or roller and avoid overspreading. If required apply a second coat after 2-4 hours. Do not apply in temperatures below 10?C.
| Brands | Leyland Trade |
|---|---|
| Ready Mixed or Tinted | Ready Mixed |
| Finish | Matt |
| Composition | Water Based |
| Location | Interior |
| Suitable For | Concrete, Plaster, Walls, Brickwork, Blockwork, Wallboards |
| Coverage | 13m2 per Litre |
| Touch Dry | 2-4 Hours |
| Application Method | Brush, Roller, Spray |
| VOC Level | Minimal |
| Offshore Delivery | No |
| Colour | White |
| Colour Name | Brilliant White |
