Polyvine Extreme Varnish Satin - Clear

New water-based crosslinked polyurethane with advanced resin technology brings the highest protection single pack ever developed. For the ultimate protection of interior and exterior surfaces to an industrial level of finish. UV blocking and absorption reduce greying, aging and deterioration of surfaces. Biocides protect against mildew, mould and fungus.

Available in satin and dead flat finishes.

To achieve full UV protection apply 3 coats of satin before a final coat of dead flat.

Technical Information:

• Finish: Satin
• Composition: Water Based
• Interior or Exterior: Interior/Exterior
• Surface: Paint, Masonry, Stone, Slate, Tile, Wood, Concrete, Paving
• Brand: Polyvine
• Coverage: 10-20 Sq Metres Per Litre
• Product Application: Remove all traces of old finishes, dirt, oil, wax and grease. These may have impregnated the surface and can cause failure. Sand in direction of the grain to provide a key. Thoroughly clean after sanding. Ensure the product is well mixed but do not shake. Apply 3 coats with a synthetic varnish brush. On new softwood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain
• Touch Dry: 30 mins - 1 hour
• Recoatable: 30 mins - 1 hour
• VOC Level: Low