Rustins Plastic Coating Thinners Clear

A two-part cold cure finish, based on Urea Formaldehyde resins, plasticised with alkyd reinforced with melamine. The finish is highly durable, hHeat resistant, resistant to impact, abrasion and solvents. For interior use only. Suitable for bare wood, suitably glued veneered wood, hardboard, MDF and unsealed cork. Enhances the colour of the wood. May be burnished to give mirror like finish using Rustins Burnishing Cream. The coating is almost colourless, but some woods may darken slightly. The coating may be used over Rustins Wood Filler, Rustins Wood Dye and wood may be bleached before coating, with Rustins Wood Bleach. Important. If any other products are used, such as timber treatments or other brands of dye & stain, test first for compatibility. Quicker drying time.

Technical Information:

• Finish: Gloss
• Composition: Solvent Based
• Interior or Exterior: Interior
• Surface: Wood, Cork, Hardboard, Plastic
• Brand: Rustins
• Coverage: 13-15 sq.m per litre per coat. This can vary depending on the absorbency of the wood
• Product Application: The mixing ratio is 1 part Hardener to 4 parts Coating by volume. Once mixed, it may be used for up to two days, if covered and kept cool. Use a brush, roller or lambs wool pad and apply evenly and liberally, finishing in the direction of the grain
• Touch Dry: Generally, touch-dry within 30 minutes–1 hour, depending on the temperature and humidity
• Recoatable: May be re-coated after 1 hour
• VOC Level: Low