Sadolin Outdoor Varnish - Clear Matt

Sadolin Outdoor Varnish – Protective Clear Varnish for Exterior wooden windows and doors

Sadolin Outdoor Varnish is a tough, clear varnish specifically formulated to enhance the natural beauty of wooden doors, window frames and conservatories. This solvent-based, waterproof varnish protects exterior wood from harmful UV rays, providing a long-lasting satin finish that resists peeling and flaking. Protective Wood Treatment for Exterior Doors, Windows and Conservatories Changing temperatures - along with the effects of rain, moisture, and UV rays - mean that throughout the year exterior wood surfaces are subjected to a barrage of different weather conditions, which can in time cause flaking, peeling and damage. Developed by our wood care experts, Sadolin Outdoor Varnish has an advanced weatherproof formulation which filters damaging UV rays whilst providing a tough, waterproof surface. Suitable for application to both new wood and previously coated wooden doors, window frames and conservatories, this outdoor wood varnish works to significantly prevent peeling and flaking. Sadolin Outdoor Varnish is ideal for use as an ongoing maintenance product, extending the life of exterior wood surfaces. Note: Sadolin Outdoor Varnish is not suitable for use on fascia’s. 

Preparation:

We recommend a trial application before you start. The final colour and coverage will depend on the original colour and condition of the wood and the number of coats applied.

NEW OR BARE WOOD:Timber exposed to the weather for 4 weeks or more should be mechanically sanded back to a clean sound surface. Wipe down bare timber with a cloth dampened with methylated spirits. Do not use white spirit. If using a nondurable timber treat with Sadolin Wood Preserver first.

PREVIOUSLY PAINTED OR VARNISHED SURFACES: Strip bare and treat as new wood.

PREVIOUSLY WOODSTAINED SURFACES: Any loose, flaking coating should be removed by use of a scraper and abrasive paper. Any grey denatured timber should be mechanically sanded back to a clean bright surface. Any mould and algal growth must be eradicated using a suitable fungicide/algicide. Wash surfaces with a mild detergent and rinse with clean water. Allow to fully dry. Wipe all surfaces with a cloth dampened with methylated spirits. As with all coatings preparation is key and poor preparation will result in poor coating performance.