Sandtex Trade High Cover Smooth Masonry Paint - Magnolia

Sandtex Trade High Cover Smooth Masonry Paint - Magnolia

Experience the excellence of Sandtex® Trade High Cover Smooth Masonry, a premium water-based paint that delivers unmatched durability and long-lasting weatherproof protection for your exterior masonry surfaces and building boards.

Designed with professionals in mind, this top-quality masonry paint offers exceptional coverage, excellent opacity, and a smooth finish that effortlessly conceals hairline cracks and imperfections on your masonry surfaces.

Unparalleled Professional Quality with Proven 15-Year Durability

Embrace the confidence of Sandtex® Trade High Cover Smooth Masonry, a paint product that combines professional-grade quality with long-lasting protection. With a proven track record of 15 years of durability, this premium masonry paint has been meticulously formulated to provide extra toughness and lasting shield to your exterior walls and masonry surfaces.

Boasting an opaque finish that resists dirt, this highly durable paint not only camouflages hairline cracks but also offers extensive coverage for a flawless result. Sandtex® Trade High Cover Smooth Masonry is the go-to choice for trade professionals seeking a premium-grade paint that delivers superior protection and a decorative matt-to-mid sheen finish.

Choose from a wide range of ready-mixed and tintable shades, allowing you to customize your project to perfection. Ideal for rendering, roughcast, pebbledash, concrete, building blocks, as well as emulsion or previously painted masonry surfaces, Sandtex® Trade High Cover Smooth Masonry paint is your trusted partner in professional-quality painting.

Painting Instructions

Preparation:

To ensure optimum results, apply one coat of Sandtex Trade High Cover Smooth Masonry diluted with clean water (40% by volume) as a primer for new or porous sound surfaces. Rectify any faults in old surfaces and pay special attention to areas prone to moisture penetration. Minor defects can be easily repaired with Sandtex Trade Exterior Easiplast. All surfaces must be thoroughly clean, dry, and free from any substances that may hinder adhesion. For sound gloss paint, ensure proper abrasion to create a suitable surface. When dry sanding, wear a suitable face mask to avoid inhaling dust. Remove loose or flaking material by scraping and brushing until a firm sound surface is achieved, using a stiff bristle brush (not wire). Eliminate organic growth by scraping or brushing with a stiff bristle brush (not wire) and applying Sandtex Trade Fungicide following the manufacturer's instructions. Treat chalking, weathered, and friable surfaces by brushing down and applying Sandtex Trade Stabilising Solution generously. Allow a minimum of 16 hours of drying time before painting.

Application:

Prior to use, stir the paint thoroughly. Apply with a masonry paint brush, exterior roller, or airless spray for optimal results. For maximum durability, it is recommended to apply two coats of Sandtex Trade High Cover Smooth masonry paint. Avoid application during rainy or frosty conditions or when the temperature is below 8ºC. Always verify color accuracy before application to prevent any inconvenience. PaintWell takes no responsibility for decorating costs incurred due to the application of an incorrect color. For consistent color, intermix packs before use. Note: If needed, Sandtex Trade High Cover Smooth can be thinned by up to 10% with clean water for airless spray application (21 thou tip 65º angle).

Wash Care:

After use, clean your equipment with clean, cold water to maintain its longevity.