Leyland Trade Satinwood Brilliant White

A hard wearing, knock-resisting, satin finish which is self-undercoating and easy to use on interior wood and metalwork.

What coverage will I get from Leyland Trade Satinwood?

1 litre will cover approximately 20 square metres, depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats. When using more than one tin of a colour in the same room, intermix before use

How should I prepare my surface(s)?

Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Prime all new and bare surfaces with the appropriate Leyland Primer. Rub down sound previously painted surfaces with fine waterproof abrasive paper to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

How do I apply Leyland Trade Satinwood?

Stir well before use. Apply evenly by brush or roller and avoid overspreading. Apply one or more coats as required and allow 16-24 hours drying between coats under normal conditions. Do not apply over polystyrene surfaces.