Leyland Trade Smooth Masonry Paint Black - 5 Litres
In stock
Out of stock
Currently out of stockOut of stock. Sign up for back-in-stock alerts and be the first to know when this product is available again!
- Product description
- More information
- Data sheets
- Questions
- Reviews
Product description
A smooth, durable coating, which maintains and enhances the original texture of the underlying surface. Suitable for most exterior masonry surfaces, offering excellent resistance to the accumulation of dirt, protecting against weathering and atmospheric pollution. The anti-carbonation properties also resist the ingress of carbon dioxide from car exhaust fumes and prevent deterioration of concrete and steel.
What coverage will I get from Leyland Trade Smooth Masonry?
1 litre will cover approximately 10 square metres on smooth surfaces. In common with all wall paints, the spreading rate will be reduced on rough and absorbent surfaces such as pebbledash. When using more than one tin of a colour, it is advised that you intermix the quantity required beforehand.
How should I prepare my surface(s)?
Ensure surface to be painted is sound, clean, dry and free from grease. Treat any mould or lichen with Sterilisation Wash as directed. Truguard Smooth Masonry can be applied directly over bare and previously painted surfaces provided these are clean, sound and firm. Chalky, underbound surfaces should be scraped, dry brushed and then given a coat of Truguard Stabilising Masonry Primer. Remove any limewash or distemper completely. Wear a suitable face mask if creating dust. Before applying Truguard Stabilising Masonry Primer to the whole surface, first carry out a test application to a small area. If this dries to a glossy film, thin with one part of White Spirit to two parts of Truguard Stabilising Masonry Primer and then test again in another small area. It is important to ensure that a non-glossy, dried, sealed surface is produced.
How do I apply Leyland Trade Smooth Masonry?
Stir well before use. Do not thin, except for absorbent surfaces, when a small quantity of clean water may be added. Apply two full coats, allowing 4-6 hours between coats under normal drying conditions. Do not apply when air or surface temperatures are below 10?C, or when rain is imminent. Suitable for application by brush, roller, conventional and airless spray.
More Information
Size 5L
Brands Leyland Trade
Ready Mixed or Tinted Ready Mixed
Finish Matt
Composition Water Based
Touch Dry 4-6 Hours
VOC Level Low
Offshore Delivery No
Suitable For Brick, Concrete, Masonry, Pebbledash
Colour Black
Colour Name Black