Location:
Interior
Coverage:
10m2 per Litre
Polyvine Heavy Duty Floor Varnish Dead Flat - Clear
In stock
Out of stock
Currently out of stockOut of stock. Sign up for back-in-stock alerts and be the first to know when this product is available again!
for 1 coat
for 2 coats
Surface type and application can vary coverage
People also bought
- Product description
- More information
- Data sheets
- Questions
- Reviews
Product description
Ultra tough crystal clear protection for interior floors.
An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. Formulated for floors and areas of high wear.
Technical Information:
- Finish: Dead Flat
- Composition: Water Based
- Interior or Exterior: Interior
- Surface: Wood, Stone, Slate, Masonry
- Brand: Polyvine
- Coverage: 10-20 Sq Metres Per Litre
- Product Application: Remove all traces of old finishes, dirt, oil, wax and grease. These may have impregnated the surface and can cause failure. Sand in direction of the grain to provide a key. Thoroughly clean after sanding. Ensure the product is well mixed but do not shake. Apply 3 coats with a synthetic varnish brush. On new softwood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain
- Touch Dry: 30 mins - 1 hour
- Recoatable: 30 mins - 1 hour
- VOC Level: Low
More Information
Brands Polyvine
Finish Matt
Composition Water Based
Offshore Delivery No
Suitable For Floor, Interior Wood
Colour Clear
Colour Name Clear