Sandtex Trade Exterior Flexible Primer Undercoat - Charcoal Grey

Sandtex Trade Exterior Flexible Primer Undercoat - Charcoal Grey

Achieve a professional finish and long-lasting durability with Sandtex® Trade Flexible Primer Undercoat. This top-quality product, boasting 10 years of proven performance, serves as the perfect opaque basecoat for gloss and eggshell finishes on exterior wood. Designed for professional use, this solvent-based primer undercoat enhances paint adhesion to wooden surfaces while flexing with the substrate, effectively preventing flaking and cracking.

Experience the benefits of a premium primer and undercoat that delivers exceptional results. Sandtex® Trade Flexible Primer Undercoat creates a robust foundation for exterior gloss and eggshell paints, ensuring optimal adhesion to wooden surfaces. Our advanced and flexible formulation provides superior resistance against flaking, cracking, and peeling, guaranteeing long-lasting durability for up to 10 years.

With excellent opacity, this wood primer and undercoat is specially formulated for use with the Sandtex® Trade Flexigloss X-Tra and Eggshell X-tra finishing systems on exterior wood and joinery. Available in White or Charcoal Grey, Sandtex® Trade Flexible Primer Undercoat is a professional-grade product suitable for various exterior wood applications, including wooden doors, window frames, gates, fences, and timber surfaces.

Painting Instructions

Preparation:

For bare wood: Ensure the wood is dry and in good condition. Sand back any gray or denatured timber until you achieve a clean, smooth surface. Smooth and round off sharp edges. For previously painted surfaces: All surfaces must be clean, dry, and free from any substances that may hinder adhesion. Wash with warm detergent solution, rinse well with clean water, and allow to dry. Abrade the surface with wet and dry abrasive paper to remove any contaminants and provide a suitable key. If dry sanding, wear a suitable face mask to avoid inhaling dust.

Application:

Thoroughly stir the product before use. Apply evenly and generously using a brush or roller, making sure not to overspread. For metal surfaces: This system can be applied to suitably primed metal surfaces. Do not apply if there is a risk of rain or if the air/surface temperature is likely to fall below 8°C, or when the relative humidity is above 80% during the application or drying period.

Wash Care:

Clean your equipment with a proprietary cleaner.