Sandtex Trade X-treme X-posure Smooth Masonry Paint - Brilliant White 5 Litre

Sandtex Trade X-treme X-posure Smooth Masonry Paint - Brilliant White 5 Litres

Sandtex® Trade X-Treme X-Posure Smooth Masonry is a premium water-based exterior paint that provides unrivaled protection against the elements. With a quick-drying formula, it offers up to 20 years of weatherproof coverage, ensuring your surfaces stay beautiful and protected all year round.

Experience Ultimate Weatherproofing. Developed for professionals, Sandtex® Trade X-Treme X-Posure Smooth Masonry features an advanced water-based formulation that adheres superbly to various exterior surfaces.

More than just a decorative coating, this top-quality masonry paint offers a highly flexible and dirt-resistant finish. It expands and contracts with the substrate, safeguarding against weather damage including water and frost.

Save Time with Quick-Drying Paint. Sandtex® Trade X-Treme X-Posure is touch dry in just 30 minutes and can be recoated within two to four hours, minimizing your painting time.

This hardwearing exterior paint incorporates anti-carbonation properties for added protection, filling and covering hairline cracks to prevent them from resurfacing.

X-Treme X-Posure provides opaque color and a smooth, matt finish, ensuring long-lasting durability and dirt resistance to keep your surfaces looking pristine.

Available in a range of ready-mixed and custom shades, Sandtex® Trade X-Treme X-Posure Smooth Masonry is the perfect choice for rendering, roughcast, pebbledash, concrete, building blocks, emulsion, or painted surfaces.

Painting Instructions

PREPARATION

New surfaces generally require minimal preparation. However, any faults in old surfaces should be rectified. Pay attention to areas prone to moisture penetration. Repair minor defects with Sandtex Trade Exterior Easiplast. Ensure all surfaces are clean, dry, and free from anything that may hinder adhesion. Wet abrade sound gloss paint for a better key. Avoid inhaling dust and use a suitable face mask for dry sanding. For further advice, consult the manufacturer. Remove loose or flaking material by scraping and brushing with a stiff bristle brush (not wire). Eliminate organic growth by scraping or brushing with a stiff bristle brush (not wire) and applying Sandtex Trade Fungicide as instructed. Brush down and treat chalking, weathered, and porous surfaces with Sandtex Trade Stabilising Solution. Allow at least 16 hours before painting.

APPLICATION

Stir well before use. Apply using a masonry paint brush, exterior roller, or airless spray. For maximum durability, it's recommended to apply two coats of Sandtex Trade X-Treme X-Posure Masonry Paint. Avoid applying when there is a risk of rain, frost, or if the temperature will fall below 7ºC during application and drying. Note: If necessary, Sandtex Trade X-Treme X-Posure can be thinned by up to 10% with clean water for airless spray application (21 thou tip 65º angle). On new surfaces, apply a diluted mist coat with up to 40% volume of clean water, followed by two full coats.

Wash Care

After use, wash equipment with clean, cold water.