Leyland Trade High Gloss Signal Red

A top quality, high gloss finish, suitable for use over most types of interior and exterior surfaces. The outstanding flow and levelling properties ensure easy brushing together with excellent opacity.

What coverage will I get from Leyland Trade High Gloss?

1 litre will cover approximately 12 square metres depending on the nature and porosity of the surface.

How should I prepare my surface(s)?

Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Prime all new and bare surfaces with the appropriate Leyland Primer followed by Leyland Undercoat. Rub down sound previously painted surfaces with fine waterproof abrasive paper to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

How do I apply Leyland Trade High Gloss?

Stir well before use. Suitable for application by brush or roller. The brush should be fully loaded for best results. Apply one or more coats as required and allow 16-24 hours drying between coats under normal conditions. Do not apply over polystyrene surfaces