Polyvine Stone And Brick Protector - Clear - 1 Litre

Absorbed into the substrate, this high performance coating protects interior and exterior stone and brick for a completely natural finish.

A high performance water-based masonry protector and water repellent that penetrates into porous substrates forming a barrier to water, moisture, grease, oil acid, alkali and salts. Suppresses mould and fungal growth and the formation of salts on natural masonry surfaces.

It has a long service life, is highly UV resistant and leaves surfaces looking natural after application.

Technical Information:

• Finish: Dead Flat
• Composition: Water Based
• Interior or Exterior: Interior/Exterior
• Surface: Stone, Plaster, Masonry, Slate
• Brand: Polyvine
• Coverage: 15-20 Sq Metres Per Litre
• Product Application: Do Not Use In Temperatures Below 5 C/40 F Or In Very High Humidity. Stone And Brick Protector Should Be Used As Supplied, Without Dilution, By Brush, Spray Or Roller. Ensure The Product Is Well Mixed But Do Not Shake. For General Applications On Masonry, Brickwork And Stone, One Coat Will Be Sufficient
• Touch Dry: 15 mins - 1 hour
• Recoatable: 15 mins - 1 hour
• VOC Level: Low